KYOWA WGA-910A Series Instruction Manual page 10

NOTATIONS USED IN THE INSTRUCTION MANUAL
The following notations are used in the Instruction Manual for convenience.
Names described on the panel surface
Names described on the panel surface are expressed in double quotation mark "
Informational notes
Certain notations are used as necessary to attract your attention to information that requires special care when
handing the product, and to information provided for reference purposes.
Examples of Notations
NOTE
Essential precautions required when handling the product.
MEMO
Reference items required when handling the product.
IMPORTANT PRECAUTIONS WHEN USING WGA-910A
NOTE
The output signal (voltage/current) when the transducer cable is broken.
When the transducer cable is broken, the product may output the following output signal (voltage/current).
Therefore, take countermeasures to avoid the adverse effect, from the output signals, on the other measuring
instruments.
Analog monitor
Voltage output: Approx. 5.7 V
The output signal (voltage/current) and unbalance load
Analog monitor
The unbalance load should be 5k ohm or more.
6
".