KYOWA WGA-910A Series Instruction Manual page 94

6-5-3. Self-Check
Self diagnosis the WGA-910A and sensor input.
In addition, the program version and serial No. can be checked on the "Self-Check" window.
(1) Memory Check
Checks that the ROM, RAM, and EEPROM have no fault.
Press the
When an error occurs, the WGA-910A turns ON the control output "Abnormal memory."
<How to operate>
1) Press the
2) Press the
MEMO
The program version and serial No. of the WGA-910A can be
checked.
3) Press the
4) The result is displayed after a short time.
Only the "Ex. SRAM" is displaying Error in the right window.
key to start the memory check. The result is displayed after a short time.
key on the "Initial Setting" window.
key on the "Self-Check" window.
key to start the memory check.
90
Initial Setting
Return
The signal to select the num-
Meas.Select Signal
ber of measurement condition
is set.
Key Operation
The initial sets on system are
System
set.
Self-check of WGA-910A is con-
Self-Check
ducted.The program version and
serial No.are displayed.
The operations of WGA-910A and
Operation Check
external device are checked.
Next
Measure
1 / 2