KYOWA WGA-910A Series Instruction Manual page 30

3-3-6. Connecting AC Power
■Connecting terminal block for AC power
・It is recommended to attach insulating coated press-fit terminals
to the connecting wires.
Use a press-fit terminal for copper wire (JIS C 2805 1.25-3) or
equivalent.
・Remove a cover from the terminal board.
・Before connecting the solderless terminals and power cable,
remove screws as described in the right figure.
・After completing terminal block wirings, do not forget to cover
the terminal block.
To prevent an electronic shock hazard, be sure to mount the
terminal block cover.
NOTE
When the power cable interferes with the other cables or connectors, wire the power cable from the top.
WARNING
26