KYOWA WGA-910A Series Instruction Manual page 19

2-1-7.MeasuringWindow(WaveformViewDualDisplayfor[BlockPeak-Bottom]and[TimePeak-Bottom])
1)
2)
3)
4)
5)
6)
7)
1) Cursor ON key
2) Switch key
3) Peak value
4) Y axis end point
5) Y-axis key
6) Y axis start point
7) RECORD key
8) Wave Clear key
9) Set key
10) Bottom value
11) Start key/Stop key
12) X axis end point
13) X-axis key
Switch Cursor ON
Peak
903.17
kN
300.00
kN
Y-axis
-200.00
0.0
RECORD X-axis
The "Cursor" window appears to display a cursor.
Display changes in order from "Number View Dual Display" - "Zoom In
Number View Dual Display" - "Waveform View Dual Display" by pressing the
Switch key.
Displays a peak value with the unit.
Displays the end point of the Y-axis that is set in the "Y-axis setting" of the
"Waveform display setting."
Opens the "Y-axis setting" window of the "Waveform display setting." While
displaying waveforms, the Y axis end point key is displayed in gray and no
key operation can be performed.Before displaying waveforms or after clearing
waveforms, the Y axis end point key operation can be performed.
Displays the start point of the Y-axis that is set in the "Y-axis setting" of the
"Waveform display setting."
Starts recording waveform data while displaying waveforms.
After recording waveform data for 1 window, the WGA-910A saves the data in
the SD card.
Clears the current displaying waveform.
Displays the setting window.
Displays the bottom value with the unit.
Press the Start key to start the waveform displaying according to the preset
condition in the "Waveform display setting".
After pressing the Start key, it changes to Stop key.
Press the Stop key to stop the waveform display.
Displays the end point of the X-axis that is set in the "X-axis setting" of the
"Waveform display setting."
Opens the "X-axis setting" window of the "Waveform display setting."
While displaying waveforms, the Y axis end point key is displayed in gray and
no key operation can be performed.
Before displaying waveforms or after clearing waveforms, the X axis end point
key operation can be performed.
Wave Clear Set
Bottom
-245.68
kN
10.0
Start
15
8)
9)
10)
11)
12)
S
13)