KYOWA WGA-910A Series Instruction Manual page 58

6-2. INPUT SETTING
6-2-1. Smoothing
Smoothing is a function whereby fluctuations of the display values are made stable by eliminating unnecessary noise
component.
Though the most popular noise at the site is a hum noise due to the AC power, noise due to the motor in the control
system also generates frequently.
The smoothing function has analog and digital methods.
(1) Analog Filter
Creates the low-pass filter circuit by using the analog circuit, offers easy-passage to input signal smaller than the
preset frequency and eliminates the input signal over than that.
<Setting Value>
1 Hz, 30 Hz, 300 Hz, and None (1 kHz or more)
<How to operate>
1) Press the
2) Press the
3) Press the
4) Press the
5) After pressing the target key, press the
setting value.
key on the "Measuring" window.
key on the "Setting" window.
key on the "Input Setting" window.
key on the "Smoothing" window.
key to register the
54
Input Setting
Return
A function that stables the
Smoothing
indicated value by reducing
unnecessary noise.
A function that automatically
Zero Compensation
compensates the fine zero-
shift.
The measured value is display-
Additional Value
ed with adding the 'Additional
Value'.
The original value of sensor
Original Value
is monitored.
Measure