KYOWA WGA-910A Series Instruction Manual page 103

(2) Set Value Read (Reading Setting Value)
After writing the edited setting value with the PC software for the SD card to the SD card, insert the SD card to the
WGA-910A for reading. And the setting values of the WGA-910A are rewritten.
The control output [SD] is turned ON during reading the setting values.
<How to operate>
1) Press the
window.
2) Press the
values" window.
The setting values are read from the SD card and setting values of
the WGA-910A are rewritten.
Press the
reading the setting values.
3) Starts reading the setting values and "Reading the set values"
window appears.
The red flame blinks and the progress condition is displayed on the
progress bar while saving the setting value.
After the saving, the "SD Card Setting" window appears again.
NOTE 1
Do not remove the SD card or do not turn OFF the WGA-910A.
Or, it may cause trouble.
In addition, the measurement cannot be conducted during reading.
NOTE 2
The "Error of reading the set values" window appears when no SD card is inserted or the SD card does not
have enough free space.
Press the
About setting value file.
File name of the setting value is as follows and the file format is dedicated to the WGA-910A.
WGA910A_SET.KS
Including all setting values (excluding the calibration value). Also includes the measuring condition setting values
from No. 1 to 32.
NOTE
・Never change the file name.
Or, the setting values cannot be read.
・Save the setting value file in the root directory (ex. ¥E Drive) of the SD card.
Or, the setting values cannot be read from the WGA-910A.
key on the "SD Card Setting (1/2)"
key on the "Confirmation of reading the set
key to get back to the previous window without
key to get back to the "Confirmation of reading the set values" window.
Blinks
99
SD Card Setting
Return
The all set values excluding
Set Value Save
the calibration value are
saved to SD card.
The all set values excluding
Set Value Read
the calibration value are
read from SD card.
The wave file name saved in
View Wave File Name
SD card
is checked or deleted.
The all datas saved in SD card
Format
are deleted.(Quick format)
Next
Measure
1 / 2