KYOWA WGA-910A Series Instruction Manual page 88

6-4-5. Level Passed Way (Trigger Slope)
Sets the way that the measured value passes the "Passed Level" as a trigger condition.
Passes from the lower level of the Passed Level to higher level.
・Rising:
・Falling : Passes from the higher level of the Passed Level to lower level.
Passes from the higher level of the Passed Level to lower level and from the lower level of the Passed
・Both:
Level to higher level.
The
<Setting Range>
Rising, Falling, Both
<How to operate>
1) Press the
window.
2) Press the
window.
3) Press the target key and
6-4-6. Hold Time of Wave
Sets a time that holds the previous waveform (time for clearing the previous waveform to complete) from the end of
one window to display the next waveform when selecting the "Auto Mode" in the "Start Mode of Wave" window.
The
<Setting Range>
0.0～99.9(sec)
<How to operate>
1) Press the
window.
2) Input a setting value with the numeric keyboard and press the
key for registration.
key is invalid and displayed in gray when selecting the "Auto Mode."
key on the "Wave Display Setting (1/2)"
key on the "Wave Display Setting (2/2)"
key for registration.
key is invalid and displayed in gray when selecting the "Normal Mode" and "Single Mode."
key on the "Wave Display Setting (2/2)"
84
Wave Display Setting
Return
The end point of X-axis(time)
X-axis Setting
is set.
10.0sec
The start and end point of Y-
Y-axis Setting
axis are set.
1000.00kN
The mode to start the wave
Start Mode of Wave
display is set.
Auto Mode
The level that measured value
Passed Level
passes for satisfying trigger
condition is set.
0.00kN
Next
Measure
1 / 2