KYOWA WGA-910A Series Instruction Manual page 98

(4) Communication Check
Checks that RS-232C and RS-485 correctly sends and receives information.
When an error occurs, the WGA-910A turns ON the control output "Communication error."
Press the
The transferred data from the external device is displayed on the received data column.
<How to operate>
1) Press the
window.
2) Press the
displayed on the transferring data column to external.
The transferred data from the external device is displayed on the
received data column.
(5) BCD Output Check
Valid for equipping the optional BCD output (WGA-910A-1) or BCD and D/A output (WGA-910A-12).
Capable of checking the operations of the connected external device by outputting an arbitrary BCD data.
The
<Setting Range>
-99999 to 99999 (count)
<How to operate>
1) Press the
2) Press the
window.
3) Input a setting value with the numeric keyboard and press the
key to output the set BCD data to the external.
key to transfer data "WGA-910A" that is displayed on the transferring data column.
key on the "Operation Check (1/2)"
key to transfer data "WGA-910A" that is
key is displayed in gray when the optional BCD output board is not connected.
key on the "Operation Check (1/2)" window.
key on the "Operation Check (2/2)"
Transferring Data
Transferred Data
94
Communication Check
Return
Tx Push the key to transfer the following data.
WGA-910A
Transfer
Rx The received data from external is indicated.
PRR010
Measure