KYOWA WGA-910A Series Instruction Manual page 52

MEMO
When executing the numeric value registering calibration with communication during measurements or
settings, the 【Registering ini. val.】 window blinks
Switch Hold
LL
Detecting
Holding
Registering ini. Val.
Registering
ini. val.
999.99
HH
- 150.00
LO
NOTE
After executing the actual load calibration and sensitivity registering calibration, the
value, registered on the numeric value registering calibration, will be cleared.
Zero Set
LO OK HI HH
Measure 0
Time Peak
kN
500.00
HI
- 999.99
LL
Registering
Registering
ini. val.
ini. Val.
Calibration is conducted with
Calibration
sensor by 'Manual Input','TEDS
Auto'or'TEDS Part'Cal.
'Smoothing','Additional Value'
Input Setting
and 'Zero Compensation'are set
The sensor output is monitored
'Comparison Set'and 'Measure
Meas.Cond.Setting
Mode Set'are set as measure-
ment condition.
The necessary setting to dis-
Wave Display Setting
play the wave such as 'X-axis'
and 'Y-axis'are set.
48
Measure
Next 1 / 2