KYOWA WGA-910A Series Instruction Manual page 120

8-3. DETAILS OF CONTROL COMMANDS
This section describes various control commands and parameters following after the commands.
<CR> and <CR><LF> denote termination code.
8-3-1. Initial setting
(1) [RES]
Content:
Format:
Parameter:
Return value format:
Description and others
(2) [RS-]
Content:
Format:
Parameter:
Return value format:
Description and others
(3) [SYS]
Content:
Format:
Parameter:
Return value format:
Description and others
Initialize the setting value.
RESp<CR>
p
0: Input setting
2: Waveform display setting
5: All settings
ok<CR><LF>
This command is available even if the power is turned OFF.
RS line test
RS-<CR>
None
ok<CR><LF>
RS-232C<CR><LF> (For the RS-232C) or
RS-485<CR><LF> (For the RS-485)
(when the data is received correctly)
Output model, etc.
SYS<CR>
None
WGA-910A-aa, xx. xx, yyyyyyyyy <CR><LF>
Contents of the return value is as follows.
00: Without option.
01: With the BCD output.
02: With the D/A output.
03: With the RS-485.
04: With the CC-Link.
12: With the BCD and D/A output.
1: Measuring condition setting
3: Initial setting
116
4: Optional setting
Serial No. (9-digit)
Character string of 0 to 9, A, B, C
Program version
If the indicated value has no 10th
digit, it is filled with '0'.
Optional model
The model