KYOWA WGA-910A Series Instruction Manual page 36

4-3. BASIC OPERATION OF SETTING
Setting windows appear as follows.
1) Press the
2) Press the target main item key on the "Setting" window.
3) Press the target item key on the main item window.
4) Press the target key and
5) Press the target function key on the item window.
6) If parameter exists, press the target parameter key, input a setting
value and press the
key on the "Measuring" window.
key on the item window.
key.
Main item key
Item keys
Target key
Function key
Parameter key
32
Calibration
Return
'Bridge Voltage','No-Load Zero
Manual Input Cal.
,'Sens.Regist.Cal'or'Actual
Load Cal'and 'Unit'are set.
Calibration is automatically
TEDS Auto Cal.
conducted with all reading
from TEDS built-in sensor.
Calibration is conducted with
TEDS Part Cal.
the only selected item from
TEDS built-in sensor.
'TEDS Read Ope.'and 'Zero dur-
TEDS Ope.Setting
ing TEDS'are set.TEDS informa-
tions are displayed.
Next
Measure
1 / 2