KYOWA WGA-910A Series Instruction Manual page 85

6-4-2. Setting Y-axis
Sets the start point and end point of the measured value (= Y-axis of the waveform).
Press the key on the "Waveform" window. The "Y-axis Setting" window appears directly.
<Setting Range>
Start point: -99999 to 99999 (count, Decimal point and unit should be considered.)
End point: 250, 500, 1000, 2000, 5000, 10000, 20000, 50000, 100000, 200000
(count, Decimal point and unit should be considered.)
<Operations for the start point of the Y-axis>
1) Press the
Y-axis Setting
window.
2) After pressing the
numerical keyboard.
Press the
3) After pressing the
the target value.
Press the target key and
<How to operate the Y-axis directly from the "Measuring" window>
1) Press the
2) The "Y-axis Setting" window appears.
Conduct setting as the above.
key on the "Wave Display Setting (1/2)"
key, input a setting value with the
key for the registration.
key, press the
key for registration.
key on the "Waveform" window.
key to display
81
Wave Display Setting
Return
The end point of X-axis(time)
X-axis Setting
is set.
10.0sec
The start and end point of Y-
Y-axis Setting
axis are set.
1000.00kN
The mode to start the wave
Start Mode of Wave
display is set.
Auto Mode
The level that measured value
Passed Level
passes for satisfying trigger
condition is set.
0.00kN
Next
Switch Cursor ON Wave Clear
kN
300.00
kN
Y-axis
-200.00
0.0
RECORD X-axis Start
Measure
1 / 2
Set
10.0
S