Chapter 4
3)For the upper, remove the 5 clamps [1],
and disconnect the connector [2]; then,
detach the cassette size detecting unit
[3].
F-4-39
4) For the lower, remove the 2 clamps [1],
and disconnect the connector [2]; then,
detach the cassette size detecting unit
[3].
F-4-40
4-20
4.4.2 Pedestal Controller PCB
4.4.2.1
Removing the
Pedestal Rear Cover
Refer to procedure 4.1.1
4.4.2.2
Removing the
Pedestal
Controller
PCB
1)Disconnect the connectors; then, remove
the 5 screws [1], and detach the pedestal
control PCB [2].
F-4-41
0003-3102
0001-1278