Canon imageRUNNER 2270 Service Manual page 423

9.5.5.5 Releasing
Locking Plate
Refer to procedure 9.5.2.5
9.5.5.6 Removing the
Fixing Film Unit
1) While pushing down the release lever
(front) [1], pull out the heater contact
[2].
F-9-44
2) While pushing down the release lever
(rear) [1], pull out the heater contact [2].
F-9-45
3) Remove the screw [1], and free the AC
the
0007-7927
0007-7929
harness [2].
F-9-46
4) Free the AC harness [1] from the edge
saddle [2].
F-9-47
5) Free the relay connector [1] of the signal
cable from the connector holder [2].
Chapter 9
9-25