Canon imageRUNNER 2270 Service Manual page 101

[1]Paper feed direction
5) Tighten the fixing screw of the manual
feed tray upper cover.
6) Put paper in the manual feed tray.
7) Make a copy, and check to make user
that the left margin of the image on
paper picked up from the manual feed
tray is 2.5 +/-1.5 mm.
- Adjusting the Margin (2nd side)
Make adjustments separately for both
small paper and large paper:
small paper: A4, B5, and the like whose
length in feed direction is shorter than
LTR.
large paper: A3, A4R, B5R, and the like
whose length in feed direction is longer
than LTR.
1) Put small paper in the cassette 1 and
large paper in the cassette 2.
2) Make a double-sided copy using the
cassette 1, and check to be sure that the
left margin L1 of the image on the 2nd
side is 2.5 +/-2.0 mm.
[1]
F-2-53
[1]Paper feed direction
3) If not as indicated, change the small
image
paper 2nd side horizontal registration
setting.
small paper:
COPIER>ADJUST>FEED-ADJ>ADJ-
REF
An increase of '1' will increase the left
margin of the image by 0.1 mm.
4) Enter the new value (obtained as the
result of the foregoing adjustment) as
the large paper 2nd side horizontal
registration setting.
Large paper:
COPIER>ADJUST>FEED-ADJ>ADJ-
RE-L.
5) Make a double-sided copy using the
cassette 2, and check to make sure that
the left margin of the image on the 2nd
side is 2.5 +/-2.0 mm.
[1]
F-2-54
[1]Paper feed detection
6) If not as indicated, change the large
paper 2nd side horizontal registration
adjustment setting.
large paper:
COPIER>ADJUST>FEED-ADJ>ADJ-
RE-L
An increase of '1' will increase the left
Chapter 2
service mode
service mode
image
service mode
2-23