Chapter 2
2.5 Checking the Images/Operations
2.5.1 Checking the Image Quality and Operation
1) Place the Test Chart on the copyboard glass, and make copies using the individual
cassettes as the source of paper; then, check the output images.
- be sure that there is no abnormal sound.
- be sure that the images are correct at all reproduction ratios.
- be sure that as many copies as specified are made normally.
2) Make settings (e.g., date, time) to suit the needs of the user.
3) Start service mode.
- press the User Mode key, press the 2 and 8 keys at the same time, press the User Mode
key once again
4)
Make
specifications-related
COPIER>OPTION>USER.
5) Make test prints by making the following selections in service mode:
COPIER>FUNCTION>MISC-P>P-PRINT.
6) Put the output [1] in the Service Book case for storage.
F-2-64
7) Press the Reset key twice to stop service mode.
8) Clean up the area around the machine, and fill out the form in the Service Book.
2-30
settings
to
suit
0007-5619
the
needs
of
the
user: