Chapter 3
3.2.4 Mounting the
Covers and the
Right Door
1) Match the pin [2] and the hole at the
bottom of the right door.
F-3-21
2) Match the mounting plate [1] found at
the top of the right door against the hook
[2] of the host machine; then, fix the
right door in place.
3) Using 2 screws [3], fix the mounting
plate [1] in place.
4) Connect the connector [4], and fit the
reuse band [5].
3-8
0007-2393
5) Open the 3 way unit [1].
6) Slightly lift the 3 way unit [1] so that it
F-3-22
is matched against the right door [2].
F-3-23