Canon imageRUNNER 2270 Service Manual page 198

5.4.2.6 Removing the
Reader Controller
PCB
1) Remove the cover [1].
[1]
F-5-36
2) Disconnect the connector [1], and
detach the flexible cable [2].
[2]
F-5-37
0007-0745
[1]
3) Remove the 8 screws [2], and detach the
cover [3].
[1]
F-5-38
4) Disconnect the 2 connectors [1], and
detach the 3 wire saddles [2]; then,
remove the 2 screws [3].
[1]
[2]
F-5-39
5) Go to the back of the machine, and free
the cable from the 5 wire saddles [1];
then, disconnect the connector [2].
Chapter 5
[2] [1]
[3]
5-33