Feed Rollor - Canon imageRUNNER 2270 Service Manual

Chapter 4

4.3.5 Feed Rollor

4.3.5.1 Removing the
Pickup
Separation Roller
1)Detach the cassette.
2)Open the right roller (if separation
roller).
3)Pick and remove
individual rollers: pickup roller [1], feed
roller [2], separation roller [3].
F-4-29
Points to Note 1 When Replacing the
Feed/Separation Roller
The collar (roller core) of the machine's
feed/separation roller is black. Do not
mount a feed/separation roller designed
(mint green) for a different model;
otherwise, ingredients of the roller can
start to build up on the intermediate
transfer belt, causing transfer faults.
Points to Note 2 When Replacing the
4-14
Roller/
0003-3113
the following
Feed/Separation Roller
The collar (roller core) of the machine's
separation/feed roller available as a
service part is black.
At times, however, you may find that a
separation/feed roller with a gray collar
(roller core) used in the machine; if so,
be sure to use a roller with a black collar
(roller core) when you must replace it
with a service part.