Canon imageRUNNER 2270 Service Manual page 468

Be sure to hold the developing assembly as
shown.
F-10-63
When fitting the developing assembly, be
sure to fit the lower right segment [2] of the
developing assembly [1] in the rail [3] of
the machine. Thereafter,
developing assembly so that [A] of the
developing assembly matches [B] of the
rail.
10.5.12.6 Removing the
1) Remove the 2 screws [1], and detach the
upper tray [2].
slide the
F-10-64
Upper Tray
F-10-65
Chapter 10
0007-8403
10-39