Chapter 13
COPIER > ADJUST > FEED-ADJ >
REGIST
1st side of copy : 2.5 1.5mm
0
2
4 6 8 10 12 14 16 18 20
5
F-13-5
2. Adjusting the Left/Right Image (1st
side)
Mechanical
Horizontal
Adjustment
3. Adjusting the Leading Edge Image
Margin (2nd side)
Adjust the registration in service mode:
COPIER>ADJUST>FEED-ADJ>RG-
REFE.
2nd side of
double-sided copy :
2.5 2.0mm
0
2
4 6 8 10 12 14 1618 20
5
F-13-6
4. Adding the Left/Right Image Margin
(2nd side)
Adjust the horizontal registration in
service mode.
- Small Size
13-2
Decrease the REGIST setting.
(a decrease of '10' will
increase the margin by 1 mm)
Paper
leading edge
Increase the REGIST setting.
(an increase of '10' will
increase the margin by 1 mm)
Registration
Decrease the RG-REFE setting.
(a decrease of '10' will increase
the margin by 1 mm)
Paper leading
edge
Increase the RGF-REFE setting.
(an increase of '10' will decrease
the margin by 1 mm)
COPIER > ADJUST > FEED-ADJ > ADJ-
REFE
Decrease the
AD-J-REFE setting.
(a decrease of '10' will
decrease the non-image
width by 1 mm)
F-13-7
- Large Size (longer than A4/LTR in feed
direction)
COPIER > ADJUST > FEED-ADJ > ADJ-
RE-L
Image left edge
Increase the
ADFJ-REFE value.
(an increase of '10' will
increase the non-image
width by 1 mm)
2nd side of
small-size
double-sided
copy : 2.5 2.0mm
0
2
4
5
6
8
10