Chapter 8
8.8.19.3 Removing the
Main Drive Assembly
( iR2270 / iR2870 )
1) Disconnect the 6 connectors [1].
2) Free the cable from the 6 cable clamps
[2].
3) Remove the re-use band [3].
F-8-161
4) Remove the 4 screws [1], and detach the
main drive assembly [2].
8-104
0007-7530
8.8.19.4 Removing the
1) Disconnect the connector (2P) [1], and
free the cable from the edge saddle [2]
and the 3 wire saddles [3].
2) Remove the E-ring [4], and detach the
F-8-162
Registration Clutch
0007-6723