Canon imageRUNNER 2270 Service Manual page 956

When matching the position, take care so
that the 3-way unit will not open 80 deg or
more.
7) Put the pin [1] into the hole [2] until it
stops, thus joining the right door [4] and
the 3 way unit [3].
F-3-24
F-3-25
Check to make sure that the groove of the
join pin is securely fitted as shown in the
figure.
8) Remove the screw [1].
F-3-26
9) Using the screw [1] you removed in step
8), mount the joint plate [2].
Be sure that the protrusion [3] of the joint
plate is in its mounting hole.
F-3-27
10) Using 5 screws, mount the right cover
(rear).
Chapter 3
3-9