Canon imageRUNNER 2270 Service Manual page 453

Chapter 10
10.5.2.4 Removing the
Main Power Supply
1) Remove the screw [1], and disconnect
the finisher connector [2].
F-10-15
2) Remove the screw [1], and disconnect
the pedestal connector [2].
F-10-16
3) Free the harness [1] of the pedestal
connector from the lamp [2].
10-24
0007-6379
4) Disconnect the 7 connectors [1], and
free the harness from the 4 clamps [2].
5) Free the harness [1] from the clamp [2].
F-10-17
F-10-18