Canon imageRUNNER 2270 Service Manual page 963

Chapter 4
2) Remove the screw [1], and detach the
fixing plate [2].
3) Remove the joint shaft [1], and free the
extension delivery unit [2] from the right
door.
4) Disconnect the connector [1], and
remove the reuse band [2]; then, remove
the 2 screws (M4x8; RS tightening).
4-2
F-4-4
F-4-5
F-4-6
5) While freeing the hinge assembly [2],
detach the right door.
F-4-7
Attaching the Right Door
1) Match the hinge [1] found at the bottom
of the right door against the lug.
2) Engage the hinge [2] found on the top of
the right door with the hook found on the
side plate.