Canon imageRUNNER 2270 Service Manual page 371

Hide thumbs Also See for imageRUNNER 2270:

Table of Contents

Removing the

Pickup Assembly 1

Refer to procedure 8.8.1

Removing the

Cassette Size Sensor

1) Remove the snap stop, and detach the

PCB cover [1].

2) Disconnect the connector from the

cassette size sensor relay PCB (in the

case of the size sensor 1, disconnect the

connector [1]; in the case of the size

sensor 2, disconnect the connector [2]).

3) Free the harness from the clamp (in the

case of the size sensor 1, the 2 clamps

[3]; in the case of the size sensor 2, the 4

clamps [3] and [4]).

4) Remove the screw [1], and detach the

cassette size sensor together with the

PCB [2] (in the case of the size sensor 1,

together with the size sensor 2; in the

case of the size sensor 2, remove the

sensor on its own).

5) Detach the cover [1] from the PCB.

Show Quick Links

Chapters

Table of Contents