Removing The Pedestal Controller Pcb - Canon iR2200 Service Manual

5.3.2 Removing the Pedestal Controller PCB

1) Disconnect the lattice connector from
the host machine.
2) Remove the rear over. (2 screws)
3) Disconnect all the connectors.
4) Release the locking support [1].
5) Remove the five screws [2], and detach
the pedestal controller PCB [3].
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 9 CASSETTE FEEDING UNIT-W1
[1]
[2]
[3]
F09-503-03
[2]
[2]
9-15 P