Option Power Supply Pcb - Canon imageRUNNER 2270 Service Manual

Chapter 10
10.5.11 Option Power Supply
PCB
10.5.11.1 Removing the
Rear Cover
Refer to procedure 10.5.1.1
10.5.11.2 Removing the
Left Cover (lower)
Refer to procedure 10.5.2.2
10.5.11.3 Removing the
Left Cover (Rear)
Refer to procedure 10.5.10.3
10.5.11.4 Removing the
Accessories
Supply PCB
1) Disconnect the connector J640 [1].
F-10-45
2) Remove the 6 connectors [1], and free
the harness from the cable clamp [2].
10-34
0007-6370
0007-6371
0007-6372
Power
0007-6373
F-10-46
3) Remove the 5 binding screws [1], and
detach the accessories power supply
PCB [2].
F-10-47