Canon imageRUNNER 2270 Service Manual page 767

Chapter 16
Sub-item
CMD-PORT Turning the TOT asynchronous status communication port ON or OFF
The port for asynchronous status communication in TUIF over TCP/IP is turned ON
or OFF.
<Setting range>
0: OFF [Default]
1: ON
NS-CMD5 Limiting the use of CRAM-MD5 in SMTP authentication
This is set to limit the use of CRAM-MD5 in SMTP authentication
<Setting range>
0: Dependent on the SMTP server [Default]
1: Do not use
NS-GSAPI Limiting the use of GSSAPI in SMTP authentication
This is set to limit the use of GSSAPI in SMTP authentication.
<Setting range>
0: Dependent on the SMTP server [Default]
1: Do not use
NS-NTLM Limiting the use of NTLM in SMTP authentication
This is set to limit the use of NTLM in SMTP authentication.
<Setting range>
0: Dependent on the SMTP server [Default]
1: Do not use
NS-PLNWS Limiting the use of PLAIN and LOGIN for SMTP authentication in an environment
of communication packet encryption
This is set to limit the use of PLAIN and LOGIN for SMTP authentication in an
environment where communication packets are encrypted
<Setting range>
0: Dependent on the SMTP server [Default]
1: Do not use
NS-PLN Limiting the use of PLAIN and LOGIN for SMTP authentication in an environment
This is set to limit the use of PLAIN and LOGIN for SMTP authentication in an
environment where communication packets are not encrypted.
<Setting range>
0: Dependent on the SMTP server [Default]
1: Do not use
16-82
COPIER > OPTION > BODY
Description Level
2
2
2
2
2
2