Canon imageRUNNER 2270 Service Manual page 456

F-10-27
10.5.4.3 Removing the
Control Panel Inside
Frame
1) Disconnect the 2 connectors between
the control panel PCB and the control
panel key switch PCB; then, free the
harness from the 2 clamps [2].
2) Disconnect the 2 connectors [3] between
the control panel PCB and the control
panel LCD.
Be sure to move the stopper in the direction
of the arrow to detach. These 2 stoppers are
moved in different directions.
3) Disconnect the 2 connectors [3] between
the control panel inverter PCB.
4) Remove the control panel inside frame
0007-7573
[1]. (2 TP screws [2], and 11 self-
tapping screws [3])
Chapter 10
F-10-28
F-10-29
10-27