Canon imageRUNNER 2270 Service Manual page 766

Sub-item
UI-BOX Setting whether or not to display the box screen of the operating section
<Setting range>
0: Do not display
1: Display [Default]
UI-SEND Setting whether or not to display the send screen of the operating section
<Setting range>
0: Do not display
1: Display [Default]
UI-FAX Setting whether or not to display the fax screen of the operating section
<Setting range>
0: Do not display
1: Display [Default]
UI-EXT Setting whether or not to display the extended screen of the operating section
<Setting range>
0: Do not display
1: Display [Default]
NEGA-GST Making additional setting about the pre-exposure sequence (excluding laser)
<Setting range>
0: Environmental control [Default]
1: Full
2: Slightly weak
3: Weak
NW-SPEED Selecting the data transfer speed at service network connection
<Setting range>
0: Auto [Default]
1: 100Base-TX
2: 100Base-T
STS-PORT Turning the TOT synchronous command communication port ON or OFF
The port for Inquiry/Response (synchronous) command communication in TUIF
over TCP/IP is turned ON or OFF.
<Setting range>
0: OFF [Default]
1: ON
COPIER > OPTION > BODY
Description
Chapter 16
Level
2
2
2
2
2
2
2
16-81