Canon imageRUNNER 2270 Service Manual page 635

YY
*1 01
*2 01
*3 01
*4 01
Description
The ongoing write operation has
been suspended (at startup).
The ongoing operation has been
suspended (at startup).
The ongoing write operation has
been suspended (at startup).
The ongoing write operation has
been suspended (at startup).
T-15-6
Remedy
1. Set '0' to TYPE-TYPE, and execute HDD-
CHECK (50 to 50 min). Thereafter, turn off and
then back on the power.
2. If the symptom still exists after the foregoing,
type in TYPE-TYPE for the partition in question,
and execute HDD-CLEAR. Thereafter, turn off
and then back on the main switch.
1. If possible, ask the user to back up the address
book data using the RUI.
2. Set '0' to TYPE-TYPE, and execute HDD-
CHECK (40 to 50 min). Thereafter, turn off and
then back on the power.
3. If the symptom still exists after the foregoing,
start download mode, and execute full formatting
using the SST and re-install the system software
(System, Language, RUI). Thereafter, turn off
and then back on the main power.
To run a recovery session for the boot partition,
you will have to use safe mode in combination
with the SST.
1. Set '0' for TYPE-TYPE, and execute HDD-
CHECK (40 to 50 min). Thereafter, turn off and
the back on the power.
2. If the symptom still exits after the foregoing,
start download mode, and execute full formatting
using the SST, and re-install the system software
(System, Language, RUI). Thereafter, turn off
and then back on the power.
1. Set '0' for TYPE-TYPE, and execute HDD-
CHECK (40 to 50 min). Thereafter, turn off and
then back on the power.
2. If the symptom still exits after the foregoing,
execute HDD-CLEAR using TYPE-TYPE=1, 2,
3, 5. Thereafter, turn off and then back on the
power.
Chapter 15
15-29