Canon imageRUNNER 2270 Service Manual page 553

Chapter 13
source of paper, and check to make sure
that the margin in the image front direction
is 2.5 +/-1.5 mm.
11) Mount the right front cover.
- margin adjustment (2nd side; small-
size)
1) Make a double-sided copy (small-size)
using the cassette you have adjusted for the
1st side as the source of paper, and check to
make sure that the front margin is 2.5 +/-
2.0 mm.
(-) (+)
0
2
4
6
8
10
2.5 ±2.0 mm
F-13-32
2) If the value is not as indicated, change
the adjustment value of the 2nd side
horizontal registration for small-size.
- COPIER>ADJUST>FEED-ADJ>ADJ-
REFE
An increase of '1' will decrease the margin
at the front by 0.1 mm.
3) Record the new setting on the service
label.
13-22
- ADJ-REFE
- margin adjustment (2nd side; large-
size; A4/LTR or longer in feed direction)
1) Make a double-sided copy (large-size)
using the cassette you have adjusted for the
1st side as the source of power, and check
to make sure that the front margin is 2.5 +/
-2.0 mm.
(-) (+)
0
2
4
6
8
10
2.5 ±2.0 mm
F-13-33
2) If the value is not as indicated, change
the adjustment value for 2nd side
horizontal registration for large-size.
- COPIER>ADJUST>FEED-ADJ>ADJ-
RE-L
An increase of '1' will decrease the margin
on the front by 0.1 mm.
3) Record the new setting on the service
label.
- ADJ-RE-L