Canon imageRUNNER 2270 Service Manual page 762

Sub-item
CPMKP-SW Turning ON and OFF the sequence of reducing the copy speed to maintain the fixing
performance for copy images
<Setting range>
0: OFF, 1: ON
HUM-SW Changing the charge output setting by humidity sensor
<Setting range>
0: Automatic control by humidity sensor [Default]
1 to 5: Fixed environment and deemed control corresponding to the parameters of
charging, development, and transfer
SCANSLCT Turning ON or OFF the function of calculating a scan area from the selected paper
size
<Setting range>
0: OFF (Determining the scan area by document detection)
1: ON (Determining the scan area by paper size)
SENS-CNF Setting the arrangement of document detection sensors
<Setting range>
0: AB type [Default]
1: Inch type
2: A type
RAW-DATA Setting whether or not to print out received data with no change
If a received image has a problem, the problem is used to isolate the data contents and
image processing.
<Setting range>
0: Usual operation [Default]
1: Print out with no change
SHARP Changing the sharpness level (Setting the central value)
<Setting range>
1 to 5 [Default: 3]
COPIER > OPTION > BODY
Description
Chapter 16
Level
2
2
2
2
2
2
16-77