Canon imageRUNNER 2270 Service Manual page 869

7) Move the horizontal registration adjusting plate [4] to the front and the rear to suit the
index you checked in step 4).
8) Make copies using the cassette you have adjusted as the source of paper, and check to see
that the blank (front side) of the image (front side) is 2.5 +/- 1.5 mm.
9) Tighten the fixing screw.
10) Mount the machine's right front cover.
11) Slide in the cassette 3/4.
3.3.2 B.Adjusting the Horizontal Registration (2nd side;
only when installing an iR C3100 Series machine)
1) Start service mode, and check the adjustment value used for the horizontal registration
of the 2nd size for the cassette 1.
-COPIER>ADJUST>FEED-ADJ>ADJ-C1RE
2) Enter the adjustment value of the leading edge margin for the 2nd side of a sheet assigned
to cassette 1 into the field for the leading edge margin for the 2nd side of a sheet assigned
to cassette 3/4.
-COPIER>ADJUST>FEED-ADJ>ADJ-C3RE
-COPIER>ADJUST>FEED-ADJ>ADJ-C4RE
3) Make double-sided copies using cassette 3/4 as the source of paper, and check to make
sure that the leading edge margin is 2.5 +/- 2 mm.
F-3-18
Chapter 3
0004-5141
3-9