Sub Hopper - Canon imageRUNNER 2270 Service Manual

Chapter 7
F-7-43
4) Remove the 3 screws [1], and detach the
hopper assembly [2].
F-7-44
When fitting the hopper assembly to the
machine, be sure that the connectors [1] are
securely connected. If the connectors [1]
are not connected, the environment heater
will not be supplied with power, leading to
image faults.
7-38
F-7-45

7.12.4 Sub Hopper

7.12.4.1 Removing the
Front Cover Unit
Refer to procedure 7.12.1.1
7.12.4.2 Removing the
Waste Toner Case
Refer to procedure 7.12.8
7.12.4.3 Removing the
Toner Cartridge
Refer to procedure 7.12.3.3
7.12.4.4 Removing the
Drum Unit
Refer to procedure 7.12.2
7.12.4.5 Removing the
Developing Assembly
Refer to procedure 7.12.5
0007-8020
0007-8027
0007-8386
0007-8387
0007-8388