Canon imageRUNNER 2270 Service Manual page 47

Chapter 1
Mode
assign print priority
register form for image merge
1-28
Description
- w/ Fisher-Q3/Q4
tray A: finisher output tray (upper)
tray B: finisher output tray (lower)
tray C: host middle tray
tray A: *copy/*Box/printer/receive/fax/other
tray B: copy/Box/*printer/receive/fax/other
tray C: copy/Box/printer/receive/*fax/*other
fine tune for receive/fax
tray A: fax/fax 1/fax 2
tray B: receive/fax 1/fax 2
tray C: *receive/*fax 1/*fax 2
- if w/o fax,
'receive/fax'>'receive'
- if fax only
'receive/fax'>'fax
- fine setup for receive/fax
only if w/ fax
- if fax is 1-line
'fax 1/fax 2'>'fax'
*Finisher-S1 (w/o output option), special tray items not indicated
- w/o output option tray
tray A: host middle tray
tray A: *copy/*Box/*printer/receive/*fax/*other
(1 output target; therefore, special tray items not indicated)
copy: *1/2/3
printer: 1/*2/3
Box: 1/2/*3
receive/fax: 1/2/*3
other: 1/2/*3
register: original size; full merge; see-through merge (20, *50, 90%); form
name (up to 24 characters); form read delete