Canon imageRUNNER 2270 Service Manual page 619

Code Cause
0006 [Cause] A subbootable that matches
the PDL type does not exit in
BOOTDEV/BOOT.
[Detection] during loading of sub
boot in oclibroot
[Timing of Detection] once at
bootable startup
0007 [Cause] An ICC profile that matches
the PDL type does not exist in
BOOTDEV/PDL.
[Detection] beginning of oclibroot;
judgment based on functions of PDL
team that are called in
[Timing of Detection] once at
bootable startup
01XX /DOSDEV is faulty.
02XX /FSTDEV is faulty.
03XX /DOSDEV2 is faulty.
04XX /FSTPDEV is faulty.
05XX /DOSDEV3 is faulty.
06XX /PDLDEV is faulty.
07XX /DOSDEV4 is faulty.
08XX /BOOTDEV is faulty.
09XX /DOSDEV5 is faulty.
FFXX There is an error in a partition that
cannot be identified.
E604 The image memory is faulty or is inadequate.
Remedy
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
Chapter 15
15-13