Chapter 2
plate back and forth. Moving the
adjusting plate toward the rear of the
machine will increase the left margin L1
of the image.
F-2-49
[1]
F-2-50
[1]Paper feed direction
8) Tighten the fixing screw.
9) Fit the cassette 2 back in.
10) Make a copy, and check to see that the
left margin of the image on paper picked
up from the cassette 2 is 2.5 +/-1.5 mm.
11) Attach the right front cover of the
machine.
*If the left margin on paper picked up from
the manual feeder is not as indicated,
2-22
image
make the following adjustments:
2) Remove the paper from the manual feed
tray.
3) Loosen the fixing screw [1] of the
manual feed tray upper cover.
4) While referring to the index you
checked in step 1), move the manual
feed tray upper cover back and forth.
Moving the manual feed tray upper
cover toward the rear of the machine
will increase the left margin of the
image L1.
F-2-51
[1]
F-2-52
image