Canon imageRUNNER 2270 Service Manual page 769

Chapter 16
Sub-item
DA-PORT Turning the TOT asynchronous status communication port ON or OFF
<Setting range>
0: CLOSE [Default]
1: OPEN (when DA is attached)
DA-CNCT Setting DA connection
<Setting range>
0: OFF [Default]
1: ON
CHNG-STS Setting the TOT status connection port number
<Setting range>
1 to 65535 [Default: 20010]
CHNG-CMD Setting the TOT status connection port number
<Setting range>
1 to 65535 [Default: 20000]
MEAP-DSP Turning screen transition from MEAP to Native ON or OFF
<Setting range>
0: OFF (Transition to the Native screen) [Default]
1: ON (No transition to the Native screen)
ANIM-SW Turn MEAP application error/jam screen display ON or OFF
<Setting range>
0: OFF (Display warning screen) [Default]
1: ON (Do not display warning screen)
MEAP-SSL Setting the MEAP HTTPS port
<Setting range>
0 to 65535 (same as the setting of another network port system) [Default: 8443]
CCD-TYPE Setting the CCD unit type
<Setting range>
0: Initial CCD unit [Default]
1: Revised CCD unit
16-84
COPIER > OPTION > BODY
Description Level
2
2
2
2
2
2
2
2