- Adjusting the Cassette 1
6) Remove the 2 claws [2], and detach the
grip (right front) [1].
F-13-29
7) Loosen the fixing screw [2] of the
adjusting plate [1].
8) While referring to the index you check
in step 5), move the adjusting plate back
and forth. Moving the adjusting plate
toward the rear of the machine will
increase the margin along the image front.
F-13-30
9) Tighten the fixing screw.
10) Put the cassette 1 back into the
machine.
11) Make a copy using the cassette 1 as the
source of paper; then, check to make sure
that the margin in the image front direction
is 2.5 +/-1.5 mm.
12) Fit the grip (right front) in place.
13) Mount the right front cover of the
machine.
- Adjusting the Cassette 2
6) Loosen the fixing screws [2] on the
horizontal registration adjusting plate [1]
of the cassette.
7) While referring to the index you
checked in step 5), move the adjusting
plate back and forth. Moving the adjusting
plate toward the rear of the machine will
increase the margin along the image front.
F-13-31
8) Tighten the fixing screw.
9) Put the cassette 2 back in place.
10) Make a copy using the cassette 2 as the
Chapter 13
13-21