Canon imageRUNNER 2270 Service Manual page 880

Chapter 4
You must not free the joint pins [2]
from the motor by removing the 2
screws.
F-4-17
<Cassette Pedestal-Y2>
1)Disconnect the connector [1].
2)Remove the 3 screws [2]; then, shift the
pickup motor 3 [3] together with its base
slightly to the right, and detach it to the
front.
F-4-18
3)Remove the 2 screws [2], and detach the
pickup motor 3 [1] from its base [2].
4-8
[1]
[2]
[1]
F-4-19
You must not free the joint pins [2]
from the motor by removing the 2
screws.
F-4-20
Points to Note When Installing the
Motor
Be sure that the timing belt[1] is sucurely
fitted to the gear[2] of the motor and the
gear [3] of the mounting base.
[1]
[2]
[1]