Canon imageRUNNER 2270 Service Manual page 747

Chapter 16
Sub-item
MTR-ON Starting the motor operation check
<Operating procedure>
1) Select this item and press the OK key to repeat ON and OFF in the following
pattern:
20-second ON -> OFF
SL Specifying a solenoid to check its operation
(Range: 1 to 9)
<Operating procedure>
1) Select this item.
2) Enter the code of the solenoid from the ten-key pad.
3) Press the OK key.
4) Press SOL-ON to check its operation.
SL-ON Starting the solenoid operation check
<Operating procedure>
1) Select this item and press the OK key to repeat ON and OFF in the following
pattern:
0.5-second ON -> 5-second OFF -> 0.5-second ON -> 5-second OFF -> 0.5-
second ON -> OFF
- Designation numbers and corresponding clutches
Multiple paper feed clutch (CL1)
1
2 Registration clutch (CL2)
3 Developing sleep clutch (CL3)
- Designation numbers and corresponding clutches
1 Polygon motor (M1)
Main motor (M2)
2
16-62
COPIER > FUNCTION > PART-CHK
Description
T-16-40
Duplex transport clutch (iR2270/2270F/2870/2870F
4
only) (CL6)
5 Extraction clutch (deck) (CL1)
6 Paper feed clutch (deck) (CL2)
T-16-41
9
10
Hopper screw motor (M12)
Cassette 3 paper feed motor (cassette pedestal)
(M1)
Level
1
1
1