Canon imageRUNNER 2270 Service Manual page 983

Chapter 4
1) Disconnect the connector [1], and
detach the No. 3 delivery sensor [2].
F-4-49
4.4.6 Delivery Solenoid 1
4.4.6.1 Removing the
No. 1
Solenoid
1) Open the right door, and open the No. 2
delivery assembly [1]; then, remove the 2
screws [2], and detach the cover [3].
F-4-50
4-22
Delivery
0007-6233
2) Remove the solenoid lever [1], and
remove the 2 screws [2].
F-4-51
3) Pull out the solenoid [1], and disconnect
the connector [2]; then, detach the solenoid
[1].
F-4-52