Canon imageRUNNER 2270 Service Manual page 556

Chapter 13
width.
4) Register the paper width basic value for
A6R as follows:
4-1) Match the manual feed side guide
against the A6R marking.
4-2) In service mode, select 'register A6R
width'.
CPOIER>FUNCTION>CST>MF-A6R
4-3) Press the OK key to save the new A6R
width.
F-13-38
5) Press the Reset key twice to end service
mode.
6) Hold down the control panel power
switch for 3 sec or more.
7) Go through the steps for the shut-down
sequence shown on the control panel so
that the main power switch may be turned
off.
8) Turn off the main power switch.
9) Wait for 3 sec or more; then, turn the
main power switch back on.
10) Print out the latest P-ROINT page in
service mode.
11) Put the printed P-PRINT page [1] in
the service book case, and dispose of the
previous printout.
13-25