Finisher/Saddle Finisher Error Codes; Error Code In Detail (Finisher, Puncher) - Canon imageRUNNER 2270 Service Manual

15.6 Finisher/Saddle Finisher Error Codes

15.6.1 Error Code in Detail (finisher, puncher)

Code Detail
code
E500 0001
E503 0002
0003
E505 0001
0002
T-15-15
Name
fault in
communication
with the finisher
(common among
all finishers)
fault in
communication
with the finisher
(Finisher-Q3/
Q4)
fault in the
backup memory
of the finisher
(common among
all finishers)
Detection
fault in
communication
between finisher
and saddle unit
fault in
communication
between finisher
and punch unit
fault in the data
stored in backup
memory
fault in the
EEPROM data of
the punch unit
Chapter 15
0008-1518
Remedy
Replace the finisher
controller PCB. Replace
the DC controller PCB.
Replace the finisher
controller PCB. Replace
the saddle controller PCB.
Check the cable.
Replace the finisher
controller PCB. Replace
the punch drive PCB.
Check the cable.
Turn off the main power.
Check the wiring of the
DC controller PCB and the
finisher controller, and
check the fuse of the 24-V
power supply. Thereafter,
turn the main power back
on.
Replace the punch driver
PCB. Replace the finisher
controller PCB.
15-51