Canon imageRUNNER 2270 Service Manual page 418

Chapter 9
F-9-28
9.5.2.6 Removing the
Fixing Film Unit
Refer to procedure 9.5.4
9.5.2.7
Removing the
Inlet Guide
1) Slide the inlet guide [1] in the direction
of the arrow to detach.
F-9-29
9.5.2.8 Removing the
Pressure Roller
1) Remove the E-ring [1], and detach the
drive gear [2].
9-20
2) Lift the front of the pressure roller [1].
0007-7915
0007-7916
3) Push in the bush [1] found at the rear in
the direction of the arrow to free it; then,
detach the pressure roller.
0007-7918
F-9-30
F-9-31