Canon imageRUNNER 2270 Service Manual page 384

8.8.17.4 Removing the
Main Power Switch
1) Remove the 4 fastons [1], and detach the
main power switch [2]. (snap-on type)
F-8-154
When connecting the 4 fastons, be sure that
they are located as indicated by their
specific location numbers.
F-8-155
8.8.17.5 Removing the
0007-6679
1) Disconnect the connector (2P) [1].
2) Free the clutch cable [2] from the wire
saddle [3].
3) Remove the fixing plate [4]. (2 screws
[5])
4) Pull out the manual feed pickup clutch
[1].
Manual Feed Pickup
Clutch
F-8-156
F-8-157
Chapter 8
0007-6681
8-101