Way Unit Controller Pcb - Canon imageRUNNER 2270 Service Manual

Hide thumbs Also See for imageRUNNER 2270:

Table of Contents

1) Open the right door, and remove the

joint pin [1].

2) Loosen the screw [2], and detach the

cover [3]. Remove the 2 screws [4], and

detach the cover [5].

3) Disconnect the connector [1], and

remove the 2 screws [2]; then, detach the

No. 3 delivery solenoid [3].

4.4.9 3 Way Unit Controller

Removing the

Inside Delivery Tray,

Reversal Guide, and

Inside Upper Cover

Refer to procedure 4.1.1.1

Removing the

Right Cover (rear)

Refer to procedure 4.1.1.2

Removing the

Refer to procedure 4.1.1.3

Removing the

Refer to procedure 4.1.1.4

Removing the

Kit Controller PCB

Show Quick Links

Chapters

Table of Contents