Chapter 10
10.5.9 All Night Power Supply
PCB
10.5.9.1 Removing the
Rear Cover
Refer to procedure 10.5.1.1
10.5.9.2 Removing the
All-Night
Supply PCB
1) Disconnect the 4 connectors [1].
F-10-40
2) Remove the 4 screws [1], and detach the
all-night power supply PCB [2].
10-32
0007-6385
Power
0007-6386
F-10-41
10.5.10
Controller
Supply PCB
10.5.10.1 Removing the
Rear Cover
Refer to procedure 10.5.1.1
10.5.10.2 Removing the
Left Cover (lower)
Refer to procedure 10.5.2.2
Power
0007-6380
0007-6381